Pitch Control Playback; Key Control Playback - Tascam CC-222SLmkII Owner's Manual

Pitch control playback

When playing back an audio CD, the pitch (or speed) of the
playback can be varied. Pitch can be varied +/- 12.5%.
1. When stopped, press the
.
P I TCH > XXX
2. Use the MULTI DIAL on the unit or
remote control to select
3. Press the MENU key to display
3. Use the on the unit or
MULTI DIAL
remote control to adjust the pitch value.

Key control playback

The key of the music can be changed during stop, playback
or playback standby modes. However, please note that this
feature does not work with MP3 discs.
1. Press the MENU key to display
2. Use the MULTI DIAL on the unit or
remote control to select
3. Press the MENU key to display
4. Use the MULTI DIAL on the unit or
remote control to adjust the key value.
The playback key can be raised or lowered 1/2 octave
in half-tone increments. Selection values: 0 (no
change), â1 to â6, ã 1 to ã 6.
MENU key to display
CD
SKIP key on the
.
ON
.
P i tch > X . X%
key on the
SKIP
.
CD KEY > XXX
SKIP key on the
.
ON
.
KEY LEVEL > XXX
SKIP key on the
4 – Disc operations 1 – Introduction
NOTE
Pitch control cannot be used with MP3 discs.
When the unit is in stop mode with CD Pitch control on,
when the PLAY or PAUSE key is pressed, the display
shows for seconds (if CD Pitch control and
P i tch ON
CD Key control are on,
P i tch/Key ON
the display for seconds).
When the unit is writing data to a disc, the Pitch
control function does not work. However, the Pitch
control menu can be operated.
NOTE
In this condition, when a CD is played back, the key
of the music is changed while the speed of the music
remains the same.
When the Key control function is on, even if the Pitch
control function is used to change the playback speed,
the key of playback will remain fixed at the preset key
{even if the key level is 0 (zero)}, the Key control func-
tion can be turned on.
When the unit is in stop mode with CD Key control on,
when the PLAY or PAUSE key is pressed, the display
shows for seconds (if CD Key control and CD
Key ON
Pitch control are on,
P i tch/Key ON
display for seconds).
When the unit is writing data to a disc, the Pitch
control function does not work. However, the Pitch
control menu can be operated.
When using the key control function, the volume of
the playback sound may occasionally sound like it is
vibrating. This is a result of the key control algorithm
working on the CD playback sound and is normal.
appears on
appears on the
19
TASCAM CC-222SL II
MK