A To B Repeat Playback; Auto Cue Function; Auto Ready Function; Pitch Control Function - Tascam CD-RW900mkII Owner's Manual

A to B repeat playback

If a specific portion between two points on the disc is specified,
that portion can be played back repeatedly.
1. During playback, press the
control at the beginning of the desired portion on
the disc.
The indicator lights up in the display and the
REPEAT
indicator will flash.
A-
2. At the end of the desired portion on the disc, press
A-B
the key again.
Then, the and
REPEAT A-B
display, and the desired A-B section will be played
back repeatedly.

Auto Cue function

Using the auto cue function, you can select a cue point where
sound begins (not where a track begins) within a track.
Turn the auto cue function on and use the A_CUE LEVEL sub-
menu option (see "Operation basics" on page 16) to set the sound
detection level (-24, -30, -36, -42, -48, -54, -60, -66 and -72 dB).
Then, select a track and press the PLAY key. The unit enters
playback ready mode.

Auto Ready function

This function allows the playing back a single track, and the
automatic cuing of the next track ready for playback.
Use the A_READY sub-menu option to turn the function on or
off. When on, the A.READY indicator lights up on the display.
Combined with Auto Cue function, the unit enters playback

Pitch control function

When playing back an audio CD, the pitch (or speed) of the play-
back can be varied. Pitch can be varied +/- 16%.
1. When stopped, press the
control to turn on the Pitch control function.
Or, use the PITCH option in the PLAY sub-menu
(refer to "Operation basics" on page 16).
The current pitch value appears on the display for
seconds and the indicator will light up.
PITCH
MENU
2. Press the key and select the PITCH CONT
option in the PLAY sub-menu to set the desired
MULTI JOG
value and push the
will appear on the display.
P i t c h > X X X
MULTI JOG
Then, rotate the
NOTE
Use the PITCH STEP option in the PLAY sub-menu to
adjust the pitch value steps from 0.1% to 1.0% in 0.1%
increments (default: 0.1%).
4 − Playback operations
A-B
key on the remote
indicators light up in the
PITCH
key on the remote
dial to enter.
dial to set the desired value.
NOTE
You can also operate this function during playback standby.
3. To cancel the A-B repeat mode and resume normal
A-B
playback, press the
The and indicators will turn off.
REPEAT A-B
NOTE
A-B repeat cannot be used when the specified A-B
section spans more than one track, and cannot be
used with MP3 discs.
When the STOP key is pressed, the specified A-B
section is cancelled.
When the PLAY key is pressed again, playback begins at exactly
the cue point.
While the auto function is on, the A.CUE indicator lights up on the
display.
ready mode at the point where the sound detection level is set in
A_CUE LEVEL sub-menu option of the next track.
MENU
3. Press the key or push the
enter and return to normal mode.
During playback, the pitch control playback can
be disabled temporarily. Press the
the remote control or use the PITCH option in the
PLAY sub-menu to turn the function off.
appears on the display and the pitch
P i t c h > O F F
control playback will be off temporarily, until the
function is re-set again.
To resume the pitch control playback, press the
PITCH
key again or use the PITCH option.
NOTE
When turning the pitch control on and off during
playback, sound output is cut for a short instant.
Pitch control cannot be used with MP3 discs.
TASCAM CD-RW900MKII
key once again.
MULTI JOG
dial to
PITCH
key on
21