Preparations; Connections - Tascam SS-CDR1 Owner's Manual

Connections

Mixer
Connecting headphones
Connect your stereo headphones to the
the knob located above the
PHONES
adjust the volume.
Connecting a PS/2 keyboard
You can use a keyboard to enter file (track) names and
folder names, and also use it to control the SS-CDR1 (see
"Operation using a computer keyboard" on page 76).
Connecting audio devices (inputs)
Connect an external audio source (e.g., CD player, mixer)
to the SS-CDR1's
ANALOG INPUTS (BALANCED)
ANALOG INPUTS (UNBALANCED)
jack. To select the input source, use the REC menu item
INPUT SELECT. To adjust the input volume, use the REC
menu item INPUT VOLUME.
Computer
jack. Use
PHONES
jack to
PHONES
jacks,
jacks, or
DIGITAL IN
4 − Preparations 4 − Preparations
External controller
Connecting audio devices (outputs )
Connect an external monitor system or mixer to the
SS-CDR1's
ANALOG OUTPUTS (BALANCED)
ANALOG OUTPUTS (UNBALANCED)
jack.
OUT
Computer
If you connect the SS-CDR1's RS-232C connector to your
computer's RS-232C connector, you'll be able to control
the SS-CDR1 from your computer via a serial connection.
After making connections, you'll need to make the correct
settings on your computer (see "Using the RS-232C con-
nector" on page 79.
Control via a parallel connection
If you want to control the SS-CDR1 via a parallel connec-
tion from an external controller, use the
nector (25-pin D-sub connector). For details on the pin
configuration of the
PARALLEL
"Control connections" on page 10.
Headphones
Keyboard
plugs,
jacks, or
DIGITAL
con-
PARALLEL
connector, refer to
19
TASCAM SS-CDR1