Table of Contents
Advertisement
7 − Using the folder finder
Adding an entire folder to a playlist (CF card only)
This operation allows you to add all files from a folder on
the CF card to the desired playlist.
However, files in a sub-folder will not be added.
1 With the folder menu screen displayed, turn the
front panel
MULTI JOG
cursor
keys) to highlight ADD PLAYLIST.
§ , ¶
2 Press the front panel
MULTI JOG
remote's
key).
ENTER
The playlist select screen will appear.
Undoing a folder menu operation (UNDO)
Some of the operations in the folder menu (folder name
editing, adding a new folder, deleting a folder) can be
undone immediately after they are executed.
This is possible only if the play mode is set to continuous
playback (CONTINUE).
NOTE
When executing an Undo, it does not matter which
folder in the folder finder screen was selected before
opening the folder menu screen.
1 Turn the front panel
MULTI JOG
remote's cursor
§ , ¶
A confirmation screen will appear.
Operations in the file menu screen
The file editing operations described below can be performed
on a CF card. Files on a CD cannot be edited. The following
explanations assume that the current device is CF, and that the
file menu screen for the applicable file is displayed.
To access the file menu screen, highlight the desired file in
the folder finder screen, and press the
("Navigating in the folder finder screen" on page 50).
54
TASCAM SS-CDR1
dial (or use the remote's
dial (or the
dial (or use the
keys) to highlight UNDO.
key
MENU
3 Turn the front panel
remote's cursor
§ , ¶
playlist in which you want to register the files.
4 Press the front panel
(or the remote's
ENTER
The selected playlist will be displayed.
5 Turn the front panel
remote's cursor
§ , ¶
within the playlist at which you want to add the
files.
The files will be added following the highlighted file.
6 Press and hold the front panel
the remote's
key).
ENTER
The folder will be added to the playlist.
In the example screen shown above, the folder delete
operation (DELETE) can be undone.
2 Press the front panel
remote's
key).
ENTER
The Undo operation will be executed, and you will
return to the folder finder screen. At this time, the file
to which Undo applied will be highlighted.
NOTE
•
If you decide to cancel the Undo operation, press
the front panel TIME (ESC) key (or the remote's
CLR/ESC key).
•
If there is no file to which the Undo operation can
be applied, the display will indicate
(CF card only)
dial (or use the
MULTI JOG
keys) to highlight the
dial or
key
MULTI JOG
˚
key or cursor
key).
¥
dial (or use the
MULTI JOG
keys) to select the position
dial (or
MULTI JOG
dial (or the
MULTI JOG
,
CAN
T UNDO
.
Advertisement
Table of Contents
