Table of Contents
Advertisement
If you connect the SS-CDR1's
connector to the RS-232C connector of your computer,
you'll be able to control the SS-CDR1 from your computer.
You'll use the menu to make communication-related set-
tings (for details on menu operations, refer to "Operations
in the menu screens" on page 18).
1 Press the
key to access the main menu list
MENU
screen.
2 Select the UTILITY menu.
3 Highlight the RS-232C item, and press the front
panel
key (or the remote's cursor
˚
The RS-232C setting screen will appear.
14
14 − Using the RS-232C connector
− Using the RS-232C connector
(
)
CONTROL I/O
RS-232C
key).
¥
4 Make the appropriate setting for each item.
BAUD RATE
Specify the baud rate (communication speed).
Choose from
,
,
4800
9600
(default:
).
1 9200
PARITY BIT
Specify the communication parity bit setting.
Choose from
,
, and
NON
EVEN
STOP BIT
Specify the communication stop bit setting.
Choose
or
(bit) (default:
1
2
DATA LENGTH
Choose the communication data length.
Choose
or
(bit) (default:
7
8
5 When you've finished making settings, press the
key (or the remote's
TIME (ESC)
return to the home screen.
NOTE
•
RS-232C settings are saved even when the power is
turned off.
•
For details on the SS-CDR1's RS-232C command
protocol, please contact TEAC Corporation's Tascam
customer support.
, and
1 9200
38400 bps
(default:
).
ODD
NON
).
1
).
8
key) to
CLR/ESC
79
TASCAM SS-CDR1
Advertisement
Table of Contents
