Table of Contents
Advertisement
10 − Copying files between CD and CF card
The SS-CDR1 will automatically read the CF card.
While the data is being read, the screen will indicate
and a progress bar popup will appear.
MED I A READ
When the data has been read, the following screen will
appear.
NOTE
If a CF card is not inserted,
appear after
MED I A READ
4. Select the format in which you want the files to be
written to the CF card.
File type:
Choose ".mp3" or ".wav"
Bitrate:
Choose 64 kbps, 128 kbps, 192 kbps, 256 kbps, or 320
kbps.
NOTE
The sampling rate is fixed at 44.1 kHz for files stored
on the CF card.
5. When you have finished making settings, hold down
the front panel
MULTI JOG
key).
ENTER
The source select screen will appear.
6. Select the track (source) that you want to copy.
Highlight the source track, and press the
apply a check mark. Repeat this process to select multi-
ple tracks.
To de-select a selected file, press the
again.
The upper right of the screen shows the capacity that
will remain on the CF card after the data has been writ-
ten.
When you are selecting the source material, an indication
of OVER will appear if the source material you are selecting
exceeds the remaining capacity on the CF card or if the
number of source tracks exceeds the allowable number of
files on the CF card, and you will be unable to proceed to
popup will
CF READ
indication.
dial (or the remote's
key to
CALL
key once
CALL
step 7 below. You will need to de-select one or more of
your selections until the OVER indication disappears.
NOTE
If you have selected only a single track, there is no
need to press the CALL key. Simply highlight the
desired track and then proceed to step 7.
7. When you have selected all of the desired tracks,
hold down the front panel
remote's
key) to confirm your selection.
ENTER
The folder finder screen will appear, allowing you to
select the target (writing destination).
8. Select the writing destination (target).
As described in "Navigating in the folder finder screen"
on page 50, move within the finder to select the desired
folder or file.
The folder or files will be written following the folder
or file you select.
The screen before copying.
The screen after copying.
9. Press and hold the front panel
the remote's
key) to confirm the copy-desti-
ENTER
nation.
dial (or the
MULTI JOG
Cursor
Copy-source folders or
files are added here.
Cursor
Added folders or files.
dial (or
MULTI JOG
69
TASCAM SS-RCD1
Advertisement
Table of Contents
