Combining Files (Combine) - Tascam SS-CDR1 Owner's Manual

If you're ready to execute the Divide operation, proceed
to step 8.
NOTE
• If the file has been registered in a playlist, the
popup will appear.
P . L I ST ENTRY
• If the file you're editing was registered in a playlist,
it will no longer be possible to play that playlist.
You will need to re-edit that playlist in the playlist
finder.

Combining files (COMBINE)

Here is how to join two WAV files, combining them into a
single file.
This is possible only if the play mode is set to consecutive
playback (CONTINUE).
NOTE
• You cannot combine MP3 files.
• You cannot combine two WAV files that have
different sampling rates or a different number of
channels.
• You can undo the Combine operation after execut-
ing it ("Undoing a file menu operation (UNDO)" on
page 58).
1 Open the file menu screen for one of the files you
want to combine.
2 Turn the front panel
MULTI JOG
remote's cursor
§ , ¶
COMBINE.
3 Press the front panel
MULTI JOG
remote's key).
ENTER
The file list will appear.
The file you had selected before opening the file menu
will have a check mark.
4 Turn the front panel
MULTI JOG
remote's cursor
§ , ¶
that you want to combine with the file that has the
check mark.
7 − Using the folder finder
dial (or use the
keys) to highlight
dial (or the
dial (or use the
keys) to highlight the file
8 Press the front panel
MULTI JOG
remote's key).
ENTER
The Divide operation will be executed, and you will
return to the folder finder screen.
5 Press the front panel
MULTI JOG
remote's key).
ENTER
The display will ask
EXECUTE?
preceding and following the connection point will play
repeatedly.
NOTE
• If the file has been registered in a playlist, the
popup will appear.
P . L I ST ENTRY
• If a file you are editing was registered in a playlist,
it will no longer be possible to play that playlist.
You'll need to re-edit that playlist in the playlist
finder.
6 To execute the Combine operation, press the front
panel dial (or the remote's
MULTI JOG
key).
The two files will be combined, and you will return to
the folder finder screen.
If you decide not to execute the Combine operation,
press the front panel
TIME (ESC)
key). You will return to the file list, and can
CLR/ESC
repeat the procedure from step 1.
dial (or the
dial (or the
, and the four seconds
ENTER
key (or the remote's
57
TASCAM SS-CDR1