Overview
Changing the Mi-Series Controller to Use DHCP
1. On the Main window, click Advanced.
2. Select the Use DHCP check box.
3. Click OK.
If the controller is configured to use DHCP, and it cannot acquire an address (for
example, if a DHCP server is not available), it will use its configured static IP address
instead.
Changing the Mi-Series Controller to Use a Static IP Address
1. On the Main window, click Advanced.
2. Select the Use Static IP check box.
3. In the IP Address box, type the IP address.
4. In the Subnet Mask box, type the subnet mask.
5. In the Gateway box, type the gateway.
6. Click OK.
6
Mi-Control Mi-Series Configuration Software