Table of Contents
Advertisement
Basic Operations
You've created a device template, implemented said template into a project file and then used RMS
CodeCrafter to generate the inclusion file code. Now you would like to close the project file and exit RMS
CodeCrafter.
Adjusting RMS CodeCrafter
Changing Visual Style
To change the appearance of RMS CodeCrafter:
Select View > Visual Styles and select from the following
Web Update
Newer versions of RMS CodeCrafter can now be acquired via the internet. The Web Update utility accesses
the AMX web site with the application ID and version number and searches for updates.
1.
Go to Help > Web Update to check for updates.
2.
If updates are available for the installed version of RMS CodeCrafter they are downloaded at this time.
3.
After the download is complete Web Update closes RMS CodeCrafter and the updates are added.
If you do not have Web Update installed, you receive a window indicating where it can be downloaded.
Setting Template Folder Destination
You can create persistent templates for monitored devices, where you provide the settings and parameters.
RMS CodeCrafter can then use the device templates for similar or the same devices in other projects.
RMS CodeCrafter will only look in this folder destination for devices, and templates are saved in this target
location by default. If you save your templates in a location other than what is listed here, RMS CodeCrafter
will not find them.
1.
With RMS CodeCrafter open to the Introductory page, click Edit Preferences to open the Preferences
window.
2.
In the Template Folder field, either type or click Browse to set the target location.
3.
Click OK.
Setting Default RMS Server Address
As part of the code generated by RMS CodeCrafter, the IP address of the RMS server can be included. The IP
address is necessary when using Scheduling and i!-ConnectLinx options.
To set the location RMS CodeCrafter uses:
1.
With RMS CodeCrafter open to the Introductory page, click Edit Preferences to open the Preferences
window.
2.
Type the IP address of the RMS server in the field, Default RMS Server Address.
3.
Click OK.
Setting Wizard to Generate Device Variable Warnings
RMS CodeCrafter generates an inclusion code file. You can designate if you want Device Variable Warnings
listed in the code file. By default the warnings are enabled, to disable:
46
Select File > Exit. If you have not already saved you are prompted to do so at this time.
Default
Office XP®
Office 2003®
RMS CodeCrafter
Advertisement
Table of Contents
