Operation Panel; Names And Functions Of The Operation Panel (Fr-Du04) - Mitsubishi Electric FR-A500 Instruction Manual

3.2 Operation Panel

With the operation panel (FR-DU04), you can set the running frequency, monitor the operation command
display, set parameters, display an error, and copy parameters.
3.2.1

Names and functions of the operation panel (FR-DU04)

Display
LED × 4 digits
•Key indications
Key
key You can select the operation mode or setting mode.
MODE
key You can determine the frequency and parameter setting.
SET
Used to increase or decrease the running frequency consecutively. Hold down this key to change the
key frequency.
Press this key in the setting mode to change the parameter setting consecutively.
key Used to give a forward rotation command.
FWD
key Used to give a reverse rotation command.
REV
Used to stop operation.
STOP
key
RESET Used to reset the inverter when its output is stopped by the protective function activated (major fault).
•Unit indications, operating status indications
Indication
Hz Lit to indicate the frequency.
A Lit to indicate the current.
V Lit to indicate the voltage.
MON Lit in the monitor display mode.
PU Lit in the PU operation mode.
EXT Lit in external operation mode.
FWD Flickers to indicate forward rotation.
REV Flickers to indicate reverse rotation.
FR-DU04
CONTROL PANEL
MON EXT
REV
Mode key
MODE REV
SET
Set key
Up down key
51
OPERATION/CONTROL
Unit indication
Hz (frequency)
Hz
A (current)
A V (voltage)
V
PU
Operation status indication
FWD
FWD
Forward rotation key
STOP
Reverse rotation key
RESET
Stop and reset key
Description
Description
3