Alcatel-Lucent AOS-W 3.4 MIB Reference Manual page 94

wlsrApFloodAttack
Objects
Status
Description
wlsrAdhocNetwork
Objects
Status
Description
wlsrWirelessBridge
Objects
Status
Description
wlsrInvalidMacOUI
Objects
Status
Description
wlsrLoadbalancingDisabled
Objects
Status
Description
wlsrWEPMisconfiguration
Objects
Status
Description
94 | AP and AM
{wlsrLocation}
current
This trap is triggered when the number of spurious AP's detected by an AP/AM at
wlsrLocation exceeds the configured IDS threshold.
{wlsrSourceMac, wlsrTargetApBSSID, wlsrTargetApSSID, wlsrRSSI, wlsrLocation}
current
This trap indicates that an AP/AM at wlsrLocation detected an ad hoc network.
Node wlsrSourceMac is connected to an ad hoc AP wlsrTargetAApBSSID with
wlsrTargetApSSID.
{wlsrTransmitterMac, wlsrReceiverMac, wlsrRSSI, wlsrLocation}
current
This trap indicates that an AP/AM at wlsrLocation detected a Wireless Bridge. The
detected bridge is between wlsrSourceMac and wlsrReceiverMac.
{wlsrAddressType, wlsrNodeMac, wlsrRSSI, wlsrLocation}
current
This trap indicates that an AP/AM at wlsrLocation detected an invalid MAC OUI in
transmission from the node wlsrNodeMac. The invalid MAC is the
<wlsrAddressType>.
{wlsrTargetApBSSID, wlsrTargetApSSID, wlsrTargetApChannel, wlsrLocation}
current
This trap indicates that an AM/AP located at wlsrLocation is reporting that an AP
with BSSID wlsrTargetApBSSID has disabled load balancing.
{wlsrTargetApBSSID, wlsrTargetApSSID, wlsrLocation, wlsrCurrentChannel}
current
This trap indicates that an Access Point has a bad WEP configuration.
AOS-W 3.4 MIB | Reference Guide