Alcatel-Lucent AOS-W 3.4 MIB Reference Manual page 497

aipGMAPgaptime
Syntax
Max-Access
Status
Description
aipGMAPupdatetime
Syntax
Max-Access
Status
Description
aipGMAPholdtime
Syntax
Max-Access
Status
Description
aipGMAPLastTrapReason
Syntax
Max-Access
Status
Description
AOS-W 3.4 MIB | Reference Guide
Integer (1..65535)
read-write
current
The time in milliseconds for gaps between successive GMAP protocol packets.
Integer (1..65535)
read-write
current
The time in seconds between GMAP update packet generation.
Integer (1..65535)
read-write
current
The time in minutes that the switch will remember information received in GMAP
update packets.
Integer
authenticatedVlan (1),
conflictingBindingRule (2),
sameProtoDifferentVlansConflict (3),
sameVlanDifferentProtocolsConflict (4),
nonMobileVlan (5),
none (6)
read-only
current
Reason for last GMAP update to not be applied. Valid reasons are:
1 - Target Vlan is an authenticated vlan
2 - Update would conflict with a binding rule
3 - Update would create two different vlan entries for the same protocol
4 - Update would create two different protocol entries for the same vlan
5 - Target vlan is not mobile
6 - No trap has been sent
AMAP Protocol | 497