Alcatel-Lucent AOS-W 3.4 MIB Reference Manual page 25

AP Information from Master Switch
Information from Any AP
Frame Retry Rate per AP BSSID
Frame Low-Speed Rate per AP BSSID
Frame Receive Error Rate per AP BSSID
Number of Current Authentications per AP
wlsxSwitchUserTable
snmpwalk -v 2c -m ALL -c <snmp community name> <switch IP addr>
.1.3.6.1.4.1.14823.2.2.1.1.2.1 | grep -c <AP Location ID x.y.z>
Number of Current APs per Switch
wlsxSwitchTotalNumAccessPoints
snmpget -v 2c -m ALL -c <SNMP community string> <Local switch IP>
.1.3.6.1.4.1.14823.2.2.1.1.3.1
Number of Down APs per Switch
globalAPState
snmpwalk -v 2c -m ALL -c <snmp community name> <Master switch IP addr>
.1.3.6.1.4.1.14823.2.2.1.1.3.4.1.6 | grep -c 'INTEGER: 2'
Number of Successful 802.1x Authentications
wlsxSwitchUserTable
To list the current dot1x users, enter:
snmpwalk -v 2c -m ALL -c <snmp community name> <switch IP addr>
.1.3.6.1.4.1.14823.2.2.1.1.2.1 | grep -c "<dot1x>"
Number of Rogue APs per Switch—Count per Building
wlsrAmRAPType
snmpwalk -v 2c -m ALL -c <snmp community name> <AP IP addr>
.1.3.6.1.4.1.14823.2.3.1.1.4.1.1.6 | grep -c "unsecure"
Number of Interfering APs per Switch
wlsrAmRAPType
snmpwalk -v 2c -m ALL -c <snmp community name> <AP IP addr>
.1.3.6.1.4.1.14823.2.3.1.1.4.1.1.6 | grep -c "interfering"
AOS-W 3.4 MIB | Reference Guide
Rx Bytes per AP BSSID (32-bit counter)
Total Bandwidth per AP BSSID (kbps)
Free Memory
SNR of Wireless Devices per AP
SNR of APs
.1.3.6.1.4.1.14823.2.2.1.1.2.1
.1.3.6.1.4.1.14823.2.2.1.1.3.1
.1.3.6.1.4.1.14823.2.2.1.1.3.4.1.6
.1.3.6.1.4.1.14823.2.2.1.1.2.1
.1.3.6.1.4.1.14823.2.3.1.1.4.1.1.6
.1.3.6.1.4.1.14823.2.3.1.1.4.1.1.6
Using MIBs | 25