Alcatel-Lucent AOS-W 3.4 MIB Reference Manual page 26

Noise Level per AP
apChannelNoise
snmpwalk -v 2c -c <snmp community name> <switch IP addr>
.1.3.6.1.4.1.14823.2.2.1.1.3.3.1.13 | grep "<ap bssid in decimal format>"
AP Information from Master Switch
wlsxSwitchGlobalAPTable
The following command retrieves the BSSIDs and local switch IP of each AP.
snmpwalk -v 2c -m ALL -c <snmp community name> <Master switch IP addr>
.1.3.6.1.4.1.14823.2.2.1.1.3.4
Information from Any AP
wlsrConfigTable
The following information can be retrieved from an AP:
Current configuration of SSID, Mode, Current Channel, Tx-Power, RTS Threshold, Retry Limit,
Preamble, Beacon Interval, Power Mgmt, Load Balance, Supported Rates, DTIM Period, LMS
Address, Encryption, Status, Ageout, MTU, Location, Hide SSID, Deny Broadcast, BG mode, Radio
Chipset, Regulatory Domain, Country Code, and Tx Rates.
snmpwalk -v 2c -m ALL -c <snmp community name> <AP IP addr>
.1.3.6.1.4.1.14823.2.3.1.1.1.1
Frame Retry Rate per AP BSSID
apBSSFrameRetryRate
snmpwalk -v 2c -c <snmp community name> <switch IP addr>
.1.3.6.1.4.1.14823.2.2.1.1.3.5.1.13 | grep "<ap bssid in decimal format>"
Frame Low-Speed Rate per AP BSSID
apBSSFrameLowSpeedRate
Frame Receive Error Rate per AP BSSID
apBSSFrameReceiveErrorRate
snmpwalk -v 2c -c <snmp community name> <switch IP addr>
.1.3.6.1.4.1.14823.2.2.1.1.3.5.1.17 | grep "<ap bssid in decimal format>"
26 | Using MIBs
snmpwalk -v 2c -c <snmp community name> <switch IP addr>
.1.3.6.1.4.1.14823.2.2.1.1.3.5.1.14 | grep "<ap bssid in decimal format>"
.1.3.6.1.4.1.14823.2.2.1.1.3.3.1.13
.1.3.6.1.4.1.14823.2.2.1.1.3.4
.1.3.6.1.4.1.14823.2.3.1.1.1.1
.1.3.6.1.4.1.14823.2.2.1.1.3.5.1.13
.1.3.6.1.4.1.14823.2.2.1.1.3.5.1.14
.1.3.6.1.4.1.14823.2.2.1.1.3.5.1.17
AOS-W 3.4 MIB | Reference Guide