Alcatel-Lucent AOS-W 3.4 MIB Reference Manual page 27

Frame Retry Rate per AP Channel
apChannelFrameRetryRate
snmpwalk -v 2c -c <snmp community name> <switch IP addr>
.1.3.6.1.4.1.14823.2.2.1.1.3.5.1.3 | grep "<ap bssid in decimal format>"
Frame Low-Speed Rate per AP Channel
apChannelFrameLowSpeedRate
snmpwalk -v 2c -c <snmp community name> <switch IP addr>
.1.3.6.1.4.1.14823.2.2.1.1.3.5.1.4 | grep "<ap bssid in decimal format>"
Frame Receive Errors per AP Channel
This information is available from any Alcatel-Lucent switch.
apChannelFrameReceiveErrorRate
snmpwalk -v 2c -c <snmp community name> <switch IP addr>
.1.3.6.1.4.1.14823.2.2.1.1.3.5.1.7 | grep "<ap bssid in decimal format>"
Total Current Channel Bandwidth (kbps) per AP
apChannelBwRate
snmpwalk -v 2c -c <snmp community name> <switch IP addr>
.1.3.6.1.4.1.14823.2.2.1.1.3.5.1.2 | grep "<ap bssid in decimal format>"
Tx Packets per AP BSSID (32-bit counter)
apBSSTxPackets
snmpwalk -v 2c -c <snmp community name> <switch IP addr>
.1.3.6.1.4.1.14823.2.2.1.1.3.5.1.8 | grep "<ap bssid in decimal format>"
Tx Bytes per AP BSSID (32-bit counter)
apBSSTxBytes
snmpwalk -v 2c -c <snmp community name> <switch IP addr>
.1.3.6.1.4.1.14823.2.2.1.1.3.5.1.9 | grep "<ap bssid in decimal format>"
Rx Packets per AP BSSID (32-bit counter)
apBSSRxPackets
snmpwalk -v 2c -c <snmp community name> <switch IP addr>
.1.3.6.1.4.1.14823.2.2.1.1.3.5.1.10 | grep "<ap bssid in decimal format>"
AOS-W 3.4 MIB | Reference Guide
.1.3.6.1.4.1.14823.2.2.1.1.3.5.1.3
.1.3.6.1.4.1.14823.2.2.1.1.3.5.1.4
.1.3.6.1.4.1.14823.2.2.1.1.3.5.1.7
.1.3.6.1.4.1.14823.2.2.1.1.3.5.1.2
.1.3.6.1.4.1.14823.2.2.1.1.3.5.1.8
.1.3.6.1.4.1.14823.2.2.1.1.3.5.1.9
.1.3.6.1.4.1.14823.2.2.1.1.3.5.1.10
Using MIBs | 27