Alcatel-Lucent AOS-W 3.4 MIB Reference Manual page 40

wlsrRetryLimit
Syntax
Max-Access
Status
Description
wlsrPreamble
Syntax
Max-Access
Status
Description
wlsrBeaconInterval
Syntax
Max-Access
Status
Description
wlsrPowerMgmt
Syntax
Max-Access
Status
Description
wlsrLoadBalance
Syntax
Max-Access
Status
Description
40 | AP and AM
Integer (1..255)
read-only
current
This attribute shall indicate the maximum number of transmission attempts of a
frame, the length of which is less than or equal to dot11RTSThreshold, that shall be
made before a failure condition is indicated. The default value of this attribute shall
be 7.
Integer {short(1),long(2)
read-only
current
The current radio preamble type in use by the WiFi interface.
Integer (1..65535)
read-only
current
This object specifies the number of transmission units that a station uses for
scheduling beacon transmissions. This value is transmitted in beacon and probe
response frames.
Integer
enable(1)
disable(2)
read-only
current
This attribute indicates whether power management is enabled or not.
Integer
enable(1)
disable(2)
read-only
current
This attribute indicates if load balancing is enabled or disabled.
AOS-W 3.4 MIB | Reference Guide