Alcatel-Lucent AOS-W 3.4 MIB Reference Manual page 84

Table 20 wlsrTrapsGroup OIDs (Continued)
Object
wlsrTransmitterMac
wlsrRSSI
wlsrRogueInfoURL
wlsrInterferingAPInfoURL
wlsrTargetApBSSID
Syntax
Max-Access
Status
Description
wlsrTargetApSSID
Syntax
Max-Access
Status
Description
wlsrTargetApChannel
Syntax
Max-Access
Status
Description
wlsrSourceMac
Syntax
Max-Access
Status
Description
84 | AP and AM
Object ID
1.3.6.1.4.1.14823.2.3.1.1.100.100.12 wlsrTrapObjectsGroup 12
1.3.6.1.4.1.14823.2.3.1.1.100.100.13 wlsrTrapObjectsGroup 13
1.3.6.1.4.1.14823.2.3.1.1.100.100.14 wlsrTrapObjectsGroup 14
1.3.6.1.4.1.14823.2.3.1.1.100.100.15 wlsrTrapObjectsGroup 15
MacAddress
read-only
current
This object is used in the traps to indicate the BSSID of the access point for which
we are raising the trap. If an air monitor is sending the trap, this will indicate AP. If an
Access Point is sending the trap, it will point to itself.
DisplayString(Size(0..64))
read-only
current
This object is used in the traps to indicate the SSID of the access point for which we
are raising the trap. If an air monitor is sending the trap, this will indicate AP. If an
Access Point is sending the trap it will point to itself.
Integer(1..165)
read-only
current
This object is used in the traps to indicate the channel of the access point for which
we are raising the trap. If an air monitor is sending the trap, this will indicate access
point. If an access point is sending the trap, it will point to itself.
MacAddress
read-only
current
This object is used in the traps to indicate the MAC address of the source.
AOS-W 3.4 MIB | Reference Guide