HISTory:TIME:LHReset?
Returned Data
Comments
Error Conditions
Reset Condition
Related
Commands
80 Programming the Enhanced Monitor
HISTory:TIME:LHReset?
(or any specific H
HISTory:RESet
Type
< hours >
uint32
0 to 4294967295
< min >
uint16
0 to 60
< sec >
uint16
0 to 60
•
If no
HISTory:RESet
time since mainframe manufacture. The history queue contains information on
which reset was done.
The following table lists the most common error conditions and causes. Error
numbers and corresponding messages can be found using
Number
Message
-311
"Memory Error"
*RST has no effect on this query.
HISTory:RESet[:ALL], HISTory:RESet:TEMPerature, HISTory:RESet:QUEue
returns the amount of operating time since the last
) command.
IST:RES:xxxx
Range
Default
none
none
none
has been performed, this query returns the amount of
Non-volatile memory is inaccessible.
Description
hours since history reset
+ minutes since history reset
+ seconds since history reset
SYSTem:ERRor?
Probable Cause
Chapter 3
query.