HISTory:TIME:LCALibration?
Returned Data
Comments
Reset Condition
Related
Commands
Chapter 3
HISTory:TIME:LCALibration?
since the last calibration was performed.
Type
< hours >
uint32
< min >
uint16
< sec >
uint16
•
This query returns 4294967295,+0,+0 if a
not been done. The history queue contains information on which calibration
was done.
*RST has no effect on this query.
CAL:VOLT?, CAL:TEMP?, CAL[:ALL]?
returns the amount of operating time that has passed
Range
0 to 4294967295
none
0 to 60
none
0 to 60
none
CAL
Programming the Enhanced Monitor
Default
Description
Hours since cal
+ minutes since cal
+ seconds since cal
,
CAL:TEMP
, or
CAL:VOLT
has
79