Table of Contents
Advertisement
SYSTem:COMMunicate:SERial:ECHO < echo >
SYSTem:COMMunicate:SERial:ECHO?
Parameters
Returned Data
Reset Condition
Related
Commands
Chapter 3
SYSTem:COMMunicate:SERial:ECHO
choices are: ON and OFF. If set to ON, an echoed character is transmitted for each
received character. If OFF, no echoing character is sent. ECHO ON is useful when
using a "dumb" terminal connected to the mainframe so that you can see what you
are typing. Set it to OFF if you are using direct computer control.
SYSTem:COMMunicate:SERial:ECHO?
state of echoing characters.
Name
Type
Range
< echo > Boolean
ON, OFF
0, 1
Type
Range
Boolean
0, 1
*RST resets ECHO to the last value saved by the SYST:NVS command.
SYSTem:COMMunicate:PRESet:TERMinal
sets the state of character echo. Parameter
returns an integer representing (0 or 1) the
Default
On
Echoing characters from keyboard. 0 is OFF,
and 1 is ON
Echoing characters from keyboard. 0 is OFF, 1 is ON
Programming the Enhanced Monitor
Description
Description
133
Advertisement
Table of Contents
