Table of Contents
Advertisement
Note that the number of pages in a booklet is always a multiple
of four, since two pages are printed on each side of each sheet of
paper. If your document is not a multiple of four pages long, the
last one, two or three pages in your folded booklet will be blank.
Windows PostScript
(Windows 2000/XP/Server 2003 only)
1.
In the driver's [Layout] tab, choose [Booklet] from the
[Pages Per Sheet] drop-down list.
2.
Check that the duplex option is set to [Flip on Short
Edge].
NOTE
If the Booklet choice is not shown, check that the Duplex
option is enabled in the driver.
options" on page
("Setting the driver device
188)
A guide to printing > 216
Advertisement
Table of Contents
