Table of Contents
Advertisement
3.
Select the ICC profile that corresponds to the device used
to capture or display your source document - this could be
a monitor, scanner or digital camera (3).
4.
Remember that the names "RGB Source 1", "RGB
Source 2" and so on relate to the number assigned to the
profile using Profile Assistant.
ICC profiles to the hard disk" on page 203.
5.
Select a Simulation Target Profile (4).
6.
This profile corresponds to the printer you want to
simulate.
7.
If you wish to produce black and grey colours that are
printed using only black toner, enable the [Preserve Black]
option. Although this produces a better quality print, the
black and grey colours will not be simulated accurately.
8.
Select your output profile (5).
9.
If [Auto] is selected, the factory default profiles that are
embedded in the MFP will be used. If you have created a
profile yourself using profile creation software, select it
here and choose a rendering intent.
intents" on page 212.
A guide to printing > 209
See "Step 2 - Down loading
See "Rendering
Advertisement
Table of Contents
