Adding A Voice Command To An Application; Starting An Application Using A Voice Command - Nokia 6600 User Manual

T o o l s
Adding a voice command to
an application
1. In the Voice commands main
view, scroll to the application
that you want to add a voice
command to, and select
→
Add voice command.
Note: To add a voice
command to a profile, the
Profiles folder must be
opened and a specific
profile selected.
2. The text Press 'Start', then speak
after tone is displayed.
• Press Start to record a voice
command. The phone sounds
a starting tone and the note
Speak now is displayed.
3. Say the voice command. The
phone will stop recording after
approximately 5 seconds.
4. After recording, the phone plays
the recorded command and the
note Playing voice command
displayed. If you do not want to
save the recording, press Quit.
90
Options
is
Copyright © 2004 Nokia. All rights reserved.
5. When the voice command has
been successfully saved, the note
Voice command saved
displayed and a beep sounds. A
symbol can be seen next to
the application.
Adding an application to
the list
Assign voice commands to other
applications that are not listed in the
Voice commands main view.
1. In the Voice commands main
view, select Options
application.
2. Available applications are
displayed. Scroll to the
application that you want to add
and press Select.
3. Add a voice command to the new
application. See
command to an application" on
page 90.
Starting an application using
a voice command
1. In standby mode, press and hold
. A short tone is played and
the note Speak now
2. When you are starting an
application by saying a voice
command, hold the phone at a
short distance away from your
mouth and say the voice
command clearly.
is
→
New
"Adding a voice
is displayed.