Call Waiting (Network Service); Settings For Call Diverting - Nokia 6600 User Manual

Send DTMF is used to send DTMF
tone sequences, for example,
passwords or bank account numbers.
Note: You may not have all
of these options. Contact
your service provider for
more details.
• Key in the digits with
. Each keystroke generates a
DTMF tone, which is transmitted
while the call is active. Press
repeatedly to produce: *, p
(inserts a pause of approximately
two seconds before, or between
DTMF characters.), and w (if you
use this character, the remaining
sequence is not sent until you
press Send again during the call).
Press to produce #.
Call waiting (network
service)
If you have activated the Call
waiting service, the network will
notify you of a new incoming call
while you have a call in progress.
1. During a call, press
the waiting call. The first call is
put on hold.
To switch between the two calls,
press Swap.
2. To end the active call, press .
-
to answer
Copyright © 2004 Nokia. All rights reserved.

Settings for call diverting

When this network service is
activated, you can direct your
incoming calls to another number,
for example, to your voice mailbox
number. For details, contact your
service provider.
→
Go to Menu
→
Settings Call divert.
• Select one of the divert options,
for example, select
divert voice calls when your
number is busy or when you
reject incoming calls.
• Select Options
the divert setting on,
set the divert setting off, or
Check status to check whether
the divert is activated or not.
• To cancel all active diverts, select
→
Options Cancel all
See "Indicators related to actions"
on page 13.
Note: You cannot have
barring of incoming calls
and call diverting active at
the same time. See
barring (network service)"
on page 86.
Y o u r p h o n e
→
Tools
If busy to
→
Activate to set
Cancel to
diverts.
"Call
23