Adding A Recipient To A Message; Sending Options; Writing Text; Using Traditional Text Input - Nokia 6600 User Manual

M e s s a g i n g
Adding a recipient to a
message
When you create a message, there
are several ways to add a recipient:
• add recipients from the Contacts
directory. To open the Contacts
directory, press
To: or Cc: fields, or select
→
Add recipient. Scroll to a
contact and press
You can mark several recipients
at a time. Press
the message. The recipients are
listed in the To:
automatically separated with a
semicolon (;).
• start to key in a name in the
field and select
contacts. The phone will retrieve
all matching entries from the
Contacts directory. If only one
entry is found, it is added
automatically. If more than one
entry is found, select a contact
from the list.
• write the phone number or e-
mail address of the recipient in
the To: field, or
• copy the recipient information
from another application and
then paste it to the
"Copying text" on page
Press to delete a recipient to the
left of the cursor.
50
or in the
Options
to mark it.
OK to return to
field and
To:
→
Options Check
To: field. See
53.
Copyright © 2004 Nokia. All rights reserved.
Note: If you write many
phone numbers or e-mail
addresses in the
you must remember to add a
semicolon (;) between each
item to separate them from
each other. When you
retrieve recipients from the
Contacts directory, the
semicolon is added
automatically.

Sending options

To change how a message is sent,
→
select Options Sending options
when you are editing a message.
When you save the message, its
sending settings are also saved.

■ Writing text

You can key in text in two different
ways, using the method traditionally
used in mobile phones or another
method called predictive text input.
To set predictive text input on or off,
press twice quickly when
writing text.

Using traditional text input

The indicator
top right of the display when you are
writing text using traditional text
input.
To: field,
is shown on the