Nokia 6600 User Manual page 117

C o n n e c t i v i t y
2. Scroll to the item you want to
send and select
→
Via Bluetooth.
3. The phone starts to search for
devices within range. Devices
using Bluetooth technology that
are within range start to appear
on the display one by one. You
can see a device icon, the device's
name, the device type, or a short
name. Paired devices are shown
with . A paired device is one
where a Bluetooth connection
already exists between your
phone and the other device.
• To interrupt the search, press
Stop. The device list freezes
and you can start to form a
connection to one of the
devices already found.
Note: When searching for
devices, some devices may
show only the unique device
addresses. To find out the
unique address of your
phone, enter the code
*#2820# in standby mode.
Note: If you have searched
for devices earlier, a list of
the devices that were found
previously is shown first. To
start a new search, select
More devices. If you switch
off the phone, the list of
devices is cleared and the
device search needs to be
started again before sending
data.
118
→
Options Send
Copyright © 2004 Nokia. All rights reserved.
4. Scroll to the device you want to
connect with and press Select.
The item you are sending is
copied to Outbox and the note
Connecting is shown.
5. Pairing (if not required by the
other device, go to step 6.)
• If the other device requires
pairing before data can be
transmitted, a tone sounds
and you are asked to enter a
passcode.
• Create your own passcode
(1-16 characters long,
numeric) and agree with the
owner of the other device to
use the same code. This
passcode is used only once
and you do not have to
memorise it.
• After pairing, the device is
saved to the Paired devices
view.
6. When the connection has been
successfully established, the note
Sending data is shown.
Data received via Bluetooth can be
found in the Inbox folder in
Messaging. See "Inbox - receiving
messages" on page 60.