Connection Settings - Nokia 6600 User Manual

Call waiting (network service)
• The network will notify you of a
new incoming call while you
have a call in progress. Select
Activate to request the network
to activate call waiting,
request the network to
deactivate call waiting, or
status to check if the function is
active or not.
Automatic redial
• When this setting is activated,
your phone will make a maximum
of ten attempts to connect the
call after an unsuccessful call
attempt. Press
automatic redialling.
Summary after call
• Activate this setting if you want
the phone to briefly display the
duration of the last call.
Speed dialling
• Select On and the numbers
assigned to the speed dialling
keys ( -
by pressing and holding the key.
See "Assigning speed dialling
keys" on page 30.
Anykey answer
• Select On, and you can answer an
incoming call by briefly pressing
any key, except
Cancel to
Check
to stop
) can be dialled
, , and .
Copyright © 2004 Nokia. All rights reserved.
Line in use (network service)
• This setting is shown only if the
SIM card supports two subscriber
numbers, that is, two phone lines.
Select which phone line
Line 2) you want to use for
making calls and sending short
messages. Calls on both lines can
be answered irrespective of the
selected line.
Note: You will not be able to
make calls if you select
2 and have not subscribed to
this network service.
To prevent line selection, select
→
change Disable
your SIM card. To change this
setting, you need the PIN2 code.

Connection settings

General information
about data connections and
access points
Glossary: Access point - The
point where your phone
connects to the Internet by
way of a data call or packet
data connection. An access
point can be provided, for
example, by a commercial
Internet service provider
(ISP), service provider, or
network operator.
To define settings for access points,
→
go to Settings Connection
Access points.
T o o l s
(Line 1 or
Line
Line
if supported by
→
77