Adding A Voice Command To An Application - Nokia 6600 User Manual

• Voice commands are sensitive to background noise. Record and use them in a
quiet environment.
• Very short voice commands are not accepted. Use longer words and avoid
similarities between different voice commands.
Note: You must say the voice command exactly as you said it when you
recorded it. This may be difficult in, for example, a noisy environment or
during an emergency, so you should not rely solely upon voice commands
in all circumstances.

Adding a voice command to an application

1 In the Voice commands main view, scroll
to the application that you want to add a
voice command to, and select Options→
Add voice
To add a voice command to a profile, the
Profiles folder must be opened and a specific
profile selected.
2 The text Press 'Start', then speak after tone
is displayed.
• Press Start
The phone sounds a starting tone and
the note Speak now
3 Say the voice command. The phone will stop recording after approximately
5 seconds.
4 After recording, the phone plays the recorded command and the note
Playing voice command
recording, press Quit.
5 When the voice command has been successfully saved, the note
command saved
seen next to the application.
ADDING AN APPLICATION TO THE LIST
Assign voice commands to other applications that are not listed in the Voice
commands main view.
1 In the Voice commands main view, select Options→
2 Available applications are displayed. Scroll to the application that you want to
add and press Select.
3 Add a voice command to the new application. See "Adding a voice command
to an application" on page 77.
Nokia 6600 User Guide
command.
to record a voice command.
is displayed.
is displayed. If you do not want to save the
is displayed and a beep sounds. A symbol
77
Voice
can be
New application.
Copyright © 2004 Nokia
Tools