Adding A Voice Command To An Application - Nokia 7610 User Manual

Any spoken word(s) can be a voice command.
• When recording, hold the phone at a short distance away from your mouth. After the
starting tone, clearly pronounce the word, or words, you want to record as a voice
command.
Before using voice tags, note that:
• Voice tags are not language-dependent. They are dependent on the speaker's voice.
• You must say the name exactly as you said it when you recorded it.
• Voice tags are sensitive to background noise. Record voice tags and use them in a quiet
environment.
• Very short names are not accepted. Use long names and avoid similar names for
different numbers.
Note: Using voice tags may be difficult in a noisy environment or during an
emergency, so you should not rely solely upon voice dialling in all circumstances.

Adding a voice command to an application

1 In the Voice commands main view, scroll to the application that you want to add a voice
command to, and select Options→
To add a voice command to a profile, the Profiles folder must be opened and a specific
profile selected.
2 The text Press 'Start', then speak after tone
• Press Start to record a voice command. The phone sounds a starting tone and the
note Speak now is displayed.
3 Pronounce the voice command. The phone will stop recording after approximately 5
seconds.
4 After recording, the phone plays the recorded command and the note
command is displayed. If you do not want to save the recording, press Quit.
5 When the voice command has been successfully saved, the note
is displayed and a beep sounds. A symbol
Add voice command.
is displayed.
can be seen next to the application.
Voice commands main
view:
Open,
Playback, Change, Delete,
Delete
Playing voice
Voice command saved
Copyright © 2004 Nokia. All rights reserved.
Options in the
Add voice command,
New application,
all, Help, and Exit.
77