Date And Time; Security - Nokia 6600 User Manual

Access point - The access point
name is needed when you want to
use your phone as a packet data
modem to your computer. See
your phone as a modem" on page
123.
Data call
Go to Settings
→
Data call.
The Data call settings affect all
access points using a data call and
high speed data call.
Online time - If there are no actions
the data call is dropped
automatically after a time-out
period. The options are
in which case you enter a time, or
Unlimited.

Date and time

The Date and time
settings allow you to define the date
and time used in your phone, as well
as change the date and time format
and separators.
→
• Clock type Analogue
Digital - to change the clock
shown in standby mode. See
"Clock" on page
• Clock alarm tone
tone played when the clock alarm
time is reached.
"Using
→
Connection
User defined,
or
102.
- to change the
Copyright © 2004 Nokia. All rights reserved.
• Auto time update
network to update time, date,
and time zone information to
your phone (network service). For
the Auto time update
take effect, the phone needs to
be restarted. Check any alarms as
these may be affected by
time update.
• GMT offset - to change the time
zone for the clock time.
• Daylight-saving
saving time on or off.

Security

Phone and SIM
Explanations for the different
security codes that may be needed:
• PIN code (4 to 8 digits) - The PIN
(Personal Identification Number)
code protects your SIM card
against unauthorised use. The
PIN code is usually supplied with
the SIM card.
After three consecutive incorrect
PIN code entries, the PIN code is
blocked. If the PIN code is
blocked, you need to unblock the
PIN code before you can use the
SIM card again. See the
information about the PUK code.
• PIN2 code (4 to 8 digits) - The
PIN2 code, supplied with some
SIM cards, is required to access
some functions.
T o o l s
- to allow the
setting to
Auto
- to set daylight
83