Additional Installation Requirements; Housing - ZyXEL Communications Prestige 316 User Manual

The two ports of the Prestige on the LAN side (Ethernet LAN and Wireless LAN
ports) can transparently communicate with each other since there is bridging
2.3

Additional Installation Requirements

In addition to the contents of your package, there are other hardware and software requirements you need
before you can install and use your Prestige. These requirements include:
1. A computer with an Ethernet NIC (Network Interface Card) installed.
2. A computer equipped with communications software configured to the following parameters:
♦
VT100 terminal emulation.
♦
9600 baud.
♦
No parity, 8 data bits, 1 stop bit, flow control set to none.
3. A cable/xDSL modem and an ISP account.
After the Prestige is properly set up, you can make future changes to the configuration through telnet
connections.
2.4

Housing

Your Prestige has rubber pads that fit snugly into grooves, enabling compact, sturdy stacking with airflow
between routers. You should not stack more than four routers for maximum stability.
To keep the Prestige operating at optimal internal temperature, keep the bottom,
sides and rear clear of obstructions and away from the exhaust of other
Hardware Installation and Initial Setup
Prestige 316 Broadband Sharing Gateway/Wireless LAN
function between the two ports.
equipment.
2-5