Table 7-5 Generic Filter Rule Menu Fields - ZyXEL Communications Prestige 316 User Manual

The following table describes the fields in the Generic Filter Rule menu.
FIELD
Filter # This is the filter set, filter rule coordinates, i.e., 2,3 refers to the second
filter set and the third rule of that set.
Filter Type Use [SPACE BAR] to select a rule. Parameters displayed below each
type will be different.
Active Select Yes to turn on the filter rule.
Offset Enter the starting byte of the data portion in the packet that you wish to
compare. The range for this field is from 0 to 255.
Length Enter the byte count of the data portion in the packet that you wish to
compare. The range for this field is 0 to 8.
Mask Enter the mask (in Hexadecimal) to apply to the data portion before
comparison.
Value Enter the value (in Hexadecimal) to compare with the data portion.
More If Yes, a matching packet is passed to the next filter rule before an
action is taken; or else the packet is disposed of according to the
action fields.
If More is Yes, then Action Matched and Action Not Matched will be
No.
Log Select the logging option from the following:
None – No packet will be logged.
Action Matched – Only packets that match the rule parameters
will be logged.
Action Not Matched – Only packets that do not match the rule
parameters will be logged.
Both – All packets will be logged.
Select the action for a matching packet. This field is N/A if previously
Action
configured More field is Yes.
Matched
Action Not Select the action for a packet not matching the rule. This field is N/A if
Matched previously configured More field is Yes.
Filter Configuration
Prestige 316 Broadband Sharing Gateway/Wireless LAN

Table 7-5 Generic Filter Rule Menu Fields

DESCRIPTION OPTIONS
Generic Filter
Rule, TCP/IP
Filter Rule
Yes/No
0 (default)
0 (default)
Yes/No
None
Action Matched
Action Not
Matched
Both
Check Next Rule,
Forward, Drop,
N/A
Check Next Rule,
Forward, Drop,
N/A
7-13