How Often Does The Prestige Update The Time; Figure 11-6 System Maintenance - Time And Date Setting; Table 11-3 Time And Date Setting Fields - ZyXEL Communications Prestige 316 User Manual

How Often Does the Prestige Update the Time?

11.3.1
The Prestige updates the time in three instances:
i. On leaving menu 24.10 after making changes.
ii. When the Prestige boots up and there is a time server configured in Menu 24.10.
iii. The time is also updated at 24-hour intervals after booting.
Menu 24.10 - System Maintenance - Time and Date Setting
Use Time Server when Bootup= NTP (RFC-1305)
Time Server Address= 128.105.39.21
Current Time:
New Time (hh:mm:ss):
Current Date:
New Date (yyyy-mm-dd):
Time Zone= GMT
Daylight Saving= No
Start Date (mm-dd):
End Date (mm-dd):
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.
Figure 11-6 System Maintenance – Time and Date Setting
FIELD
Use Time Server when
Bootup
System Maintenance and Information
Prestige 316 Broadband Sharing Gateway/Wireless LAN

Table 11-3 Time and Date Setting Fields

Enter the time service protocol that your time server will send when the
Prestige powers up. Choices are Daytime (RFC-867), Time (RFC-868), NTP
(RFC-1305) and None. The main differences between them are the format,
e.g., the Daytime (RFC-867) format is day/month/date/year/time zone of the
server while the Time (RFC-868) format gives a 4-byte integer giving the
total number of seconds since 1970/1/1 at 0:0:0. The NTP (RFC-1305)
format is similar. Not all time servers support all protocols, so you may have
to check with your ISP/network administrator or use trial and error to find a
protocol that works. If you select None (this is the default value), you can
23 : 54 : 31
23 : 54 : 29
2000 - 01 - 01
2000 - 01 - 01
01 - 00
01 - 01
DESCRIPTION
11-5