Table of Contents
Advertisement
Remote Node
1. Hinet
Reset Node (0 to update screen):
The total budget is the time limit on the accumulated time for outgoing calls to a remote node. When this
limit is reached, the call will be dropped and further outgoing calls to that remote node will be blocked. After
each period, the total budget is reset. The default for the total budget is 0 minutes and the period is 0 hours,
meaning no budget control. You can reset the accumulated connection time in this menu by entering the
index of a remote node. Enter 0 to update the screen. The budget and the reset period can be configured in
Menu 11.1 for the remote node.
FIELD
Remote Node
Connection Time/Total
Budget
Elapsed Time/Total
Period
11.2.2 Call History
This is the second option in Menu 24.9 – System Maintenance – Call Control. It displays information
about past incoming and outgoing calls. Enter 2 from Menu 24.9 – System Maintenance – Call Control to
bring up the following menu.
System Maintenance and Information
Prestige 316 Broadband Sharing Gateway/Wireless LAN
Menu 24.9.1 - Budget Management
Connection Time/Total Budget
No Budget
Figure 11-4 Budget Management
Table 11-1 Budget Management
DESCRIPTION
Enter the index number of the remote node
you want to reset (just one in this case).
This is the total connection time that has
gone by (within the allocated budget that you
set).
The period is the time cycle in hours that the
allocation budget is reset. The elapsed time is
the time used up within this period.
Elapsed Time/Total Period
No Budget
EXAMPLE
1
5/10 means that 5 minutes out
of a total allocation of 10
minutes have gone by.
0.5/1 means that 30 minutes
out of the 1 hour time period
has gone by.
11-3
Advertisement
Table of Contents
Troubleshooting
