Note
Type some extra description of the BB.
Click to Apply your changes to the BB configuration.
Apply
Cancel
Click Cancel to return to the previous screen.
16.4.2 Adding a Configuration BB
Click Add from Figure 16-5. Type a Name to identify your existing or new Configuration BB. When you add a
new Configuration BB, you must choose what device type and BB configuration type you wish to add, from the
Device and Type list boxes respectively.
The following table describes the fields in this screen
TYPE
Name
Type a unique name for the building block.
Device
Select the model series. The configuration BB's available differ for each series.
Type
Select the configuration. Choices available depend on the model series selected.
Note
Type some extra description of the BB
Next
Click Next to create the BB. This BB is then available in the BB pool for this
domain.
Cancel
Click Cancel to begin configuring the screen afresh.
16.5 Component BBs
Current component BB types are IP address and e-mail address. Click Building Block > Component BB to see
the following screen.
Configuration > Building Blocks
Figure 16-7 Building Block > Configuration BB > Add
Table 16-6 Building Block > Configuration BB > Add
DESCRIPTION
Vantage CNM 2.0
16-5