Owner Info - ZyXEL Communications Vantage CNM 2.0 User Manual

LABEL
Time Protocol
(or Use Time Server
when Bootup)
Time Server
Address
Time Zone
Daylight Savings
Start Date
End Date
Calibrate (Prestige
only)
Apply
Reset

4.2.4 Owner Info

The address book is the equivalent of a device owner BB. You can select from previous entries or save as new
entries.
Configuration > Select Device BB & General
Table 4-3 Configuration > General > Time Setting
Select the time service protocol that your timeserver sends when you turn on the
device. Not all timeservers support all protocols, so you may have to check with your
ISP/network administrator or use trial and error to find a protocol that works.
The main difference between them is the format.
Daytime (RFC 867) format is day/month/year/time zone of the server.
Time (RFC 868) format displays a 4-byte integer giving the total number of seconds
since 1970/1/1 at 0:0:0.
The default, NTP (RFC 1305), is similar to Time (RFC 868).
Select None to enter the time and date manually.
Enter the IP address of your timeserver. Check with your ISP/network administrator if
you are unsure of this information (the default is tick.stdtime.gov.tw).
Choose the Time Zone of your location. This will set the time difference between your
time zone and Greenwich Mean Time (GMT).
Select this option if you use daylight savings time. Daylight saving is a period from late
spring to early fall when many countries set their clocks ahead of normal local time by
one hour to give more daytime light in the evening.
Enter the month and day that your daylight-savings time starts on if you selected
Daylight Savings.
Enter the month and day that your daylight-savings time ends on if you selected
Daylight Savings.
Select the check box to have your Prestige use the timeserver (that you configured
above) to set its internal system clock.
Click Apply to save your changes back to the device.
Click Reset to begin configuring this screen afresh.
DESCRIPTION
Vantage CNM 2.0
4-7