Table 11-4 Peer Id Type And Content Fields - ZyXEL Communications Vantage CNM 2.0 User Manual

LOCAL ID TYPE
E-mail Type an e-mail address (up to 31 characters) by which to identify this ZyXEL device.
The domain name or e-mail address that you use in the Content field is used for identification purposes
only and does not need to be a real domain name or e-mail address.
PEER ID TYPE
IP Type the IP address of the computer with which you will make the VPN connection or
leave the field blank to have the ZyXEL device automatically use the address in the
Secure Gateway field.
DNS Type a domain name (up to 31 characters) by which to identify the remote IPSec router.
E-mail Type an e-mail address (up to 31 characters) by which to identify the remote IPSec router.
The domain name or e-mail address that you use in the Content field is used for identification purposes
only and does not need to be a real domain name or e-mail address. The domain name also does not have
to match the remote router's IP address or what you configure in the Secure Gateway Addr field below.
11.1.14 IKE Phases
There are two phases to every IKE (Internet Key Exchange) negotiation – phase 1 (Authentication) and phase 2
(Key Exchange). A phase 1 exchange establishes an IKE SA and the second one uses that SA to negotiate SAs
for IPSec.
In phase 1 you must:
Choose a negotiation mode.
Authenticate the connection by entering a pre-shared key.
Choose an encryption algorithm.
Choose an authentication algorithm.
Choose a Diffie-Hellman public-key cryptography key group (DH1 or DH2).
Set the IKE SA lifetime. This field allows you to determine how long an IKE SA should stay up
before it times out. An IKE SA times out when the IKE SA lifetime period expires. If an IKE SA
times out when an IPSec SA is already established, the IPSec SA stays connected.
In phase 2 you must:
Choose which protocol to use (ESP or AH) for the IKE key exchange.
Choose an encryption algorithm.
Choose an authentication algorithm
Choose whether to enable Perfect Forward Secrecy (PFS) using Diffie-Hellman public-key
cryptography. Select None (the default) to disable PFS.
Choose Tunnel mode or Transport mode.
Set the IPSec SA lifetime. This field allows you to determine how long the IPSec SA should stay
up before it times out. The ZyXEL device automatically renegotiates the IPSec SA if there is traffic
Configuration > VPN
Table 11-3 Local ID Type and Content Fields

Table 11-4 Peer ID Type and Content Fields

CONTENT
CONTENT
Vantage CNM 2.0
11-5