Figure 4-3 Configuration > G; Table 4-2 Configuration > General > Ddns - ZyXEL Communications Vantage CNM 2.0 User Manual

4.2.2 DDNS
Use this screen to configure your DNS parameters
The following table describes the fields in this screen
LABEL
Active
Service Provider
DDNS Type
User
Password
Enable Wildcard
Host Names 1~3
Configuration > Select Device BB & General
Figure 4-3 Configuration > General > DDNS
Table 4-2 Configuration > General > DDNS
Select this check box to use dynamic DNS.
Select the name of your Dynamic DNS service provider.
Select the type of service that you are registered for from your Dynamic DNS
service provider.
Enter your user name.
Enter the password assigned to you.
Select the check box to enable DYNDNS Wildcard.
Enter the host names in the three fields provided. You can specify up to two host
names in each field separated by a comma (",").
DESCRIPTION
Vantage CNM 2.0
4-5