4 Configuration > Select Device BB &
This section shows you how to use the select device building block screen and how to configure the
These screens will vary depending on which model you're configuring.
When you click a configuration menu, the screen shows the current device configuration.
If you're unfamiliar with ZyXEL device configurations, please consult your device User's Guide.
Configuration > General can be saved as one Configuration BB.
4.1
Select Device BB
This screen essentially allows you copy a device's total configuration (except WAN, NAT and VPN) and paste it
to another device.
4.1.1 Procedure to Copy and Paste a Device's Configuration
1.
Select the device from which you want to copy its configuration.
2.
Click Configuration > Select Device BB to display the next screen.
3.
Click the "Save as a BB" icon (
4.
Select the device to which you want to paste this configuration.
5.
Click Configuration > Select Device BB to display the next screen.
6.
Click the "Load a BB" icon (
7.
Click the Apply button to save that configuration to the device.
8.
This device configuration can then be further fine-tuned using the regular configuration menus and saved
as another new device BB.
Configuration > Select Device BB & General
) and save it as a new BB with a unique device BB name.
) and select the BB you just saved.
Vantage CNM 2.0
General
General menus.
4-1