Figure 16-3 Building Block > Device BB > Edit > Configuration
16.3.3 Adding a New BB
Click Add from Figure 16-1.The next screen asks you what model type BB you want to add. This should be the
same as the model types supported by Vantage.
TYPE
Name
Type a unique name for the building block.
Device
Select the device model.
Note
Type some extra description of the BB
Next
Click to proceed to the following screen
Cancel
Click to return to the previous screen.
16.4 Configuration BBs
There are two model series. ZyWALL and Prestige. Each series has its own BB set.
Click Building Block > Configuration BB.
Configuration > Building Blocks
Figure 16-4 Building Block > Device BB > Add
Table 16-3 Building Block > Device BB > Add
DESCRIPTION
Vantage CNM 2.0
16-3