Table of Contents
Advertisement
LABEL
Upgrade
Reset
18.2.1 License Upgrade
Click Upgrade in Table 18-2 to display this screen.
Figure 18-3 System > License > License Management > Upgrade
The following table describes the fields in this screen.
Table 18-3 System > License > License Management > Upgrade
LABEL
Activation Key
Service Set Key
Apply
Cancel
18.3 System >Preferences
System preferences are global Vantage server settings.
Vantage Server Public IP Address
If you change the Vantage server public IP Address, then each (Vantage-registered) device's Manager IP address
must change too.
Step 1. Go to the System>Preferences>Server screen.
Step 2. Enter the new IP address in the Vantage CNM Public IP field and Apply.
Step 3. To change all registered devices' Manager IP address to the new IP address, you must do one of the
following:
•
Manually restart each device and wait about 5 minutes until the device registers with Vantage.
•
Access each device's command line interface and enter "CNM managerIp x.x.x.x" where "x.x.x.x"
is the new Vantage CNM public IP address.
Other System Screens
Table 18-2 System > License > License Management
Click Upgrade to proceed to the next screen.
Click Reset to begin configuring the screen afresh.
Copy and paste or type the Activation Key that is generated in the
myZyXEL.com website.
Copy and paste or type the Service Set Key that is generated in the
myZyXEL.com website.
Click Apply to begin the license upgrade process. Vantage must have an
Internet connection.
Click Cancel to return to the previous screen.
DESCRIPTION
DESCRIPTION
Vantage CNM 2.0
18-3
Advertisement
Table of Contents
