Vantage CNM 2.0
20.3 VPN Editor
This is a graphical VPN editor screen where you can click and drag VPN tunnels (single-click VPN) and also
view individual tunnel details.
See Table 2-5 for a description of the icons used in the VPN Editor.
20.3.1 Graphical VPN Tunnel Creation
Configure IPSec tunnels graphically as follows
Step 1.
Drag the ZyXEL device icons around the screen as you please. Drag them apart to view each device
more clearly. Save this view by clicking Save.
Step 2.
Right-click a ZyXEL device (A-End) and select VPN in the popup menu. Click the ZyXEL device
again and drag (you should see a red line) to another ZyXEL device (Z-End), then release the mouse
button.
Step 3.
You see the Tunnel IPSec Detail screen as shown next. Note that information in some fields has
been automatically generated for you when you configure VPN this way. See Table 11-6 for
information on configuring this screen. At minimum, you must fill in the fields with the red
asterisks. You can accept (or change) the automatically configured information in the other fields to
set up the tunnel.
20-2
Other Monitor Screens