Table of Contents
Advertisement
Prestige 724 G.SHDSL CSU/DSU
This appendix describes how to prepare your computer and computer network to connect to the
Introduction
Since most Internet-related/network-related protocols are dependent on TCP/IP, you need to install and
configure TCP/IP on your computer before you can access the Internet.
Windows 95/98/Me/NT/2000, Macintosh OS 7 and later operating systems and all versions of UNIX and
LILNUX all include the software components you need to install and use TCP/IP on your computer.
Windows 3.1 will require the purchase of a third-party TCP/IP application package.
Installing TCP/IP Components for Windows 95/98/Me
You need to open the Network window to add and to configure TCP/IP.
1.
Click Start in the task bar (usually at the lower left-hand corner of the screen).
2.
Move the mouse to Settings and then click Control Panel.
3.
In the Control Panel window, double-click the Network icon to open it.
The network window displays a list of installed components. You need a network adapter, the TCP/IP
protocol and Client for Microsoft Networks.
If you need the adapter:
a.
In the Network window, click Add.
b.
Select Adapter and then click Add.
c.
Select the manufacturer and model of you network adapter, and then click OK
If you need TCP/IP:
a.
In the Network window, click Add.
b.
Select Protocol and then click Add.
c.
Select Microsoft from the list of manufacturers.
d.
Select TCP/IP from the list of network protocols and then click OK.
B
Appendix B
TCP/IP
Internet.
TCP/IP
Advertisement
Table of Contents
