Prestige 724 G.SHDSL CSU/DSU
Step 2.
Entering the Default System Password
The login screen will prompt you to type the password. For your first login, type the default password 1234.
The screen displays an "X" for each character you type.
If, after logging on, there is no activity for longer than five minutes, your Prestige
will automatically log you out and display a blank screen. Press [ENTER] to bring
2.5
Navigating the SMT Interface
Use the SMT (System Management Terminal) interface to configure your Prestige. The following figure is
an overview of the Prestige SMT menu screens.
2-4
Enter Password : XXXX
Figure 2-4 Login Screen
up the login screen again.
Hardware Installation and Initial Setup