Getting Started
1. General Setup
2. WAN Setup
3. Data Port Setup
Advanced Applications
11. Channel Setup
2.6.1 System Management Terminal Interface Summary
NO.
MENU TITLE
1
General Setup
2
WAN Setup
3
Data Port Setup
11
Channel Setup
23
System Password
24
System Maintenance
99
Exit
2.7
Changing the System Password
Change the default system password by performing the following steps.
Step 1.
In the main menu, type 23 to display Menu 23 – System Password as shown in the following
figure. When the menu appears, type the old system password, i.e., 1234, and press [ENTER].
Hardware Installation and Initial Setup
Copyright (c) 1994 - 2001 ZyXEL Communications Corp.
Prestige 724 Main Menu
Enter Menu Selection Number:
Figure 2-6 SMT Main Menu
Table 2-3 Main Menu Summary
Use this menu to set up routing/bridging and general information.
Use this menu to configure WAN settings.
Use this menu to configure the data port interface.
Configure channel setup and remote management in this menu.
Change your password in this menu (recommended).
From displaying system status to uploading firmware, this menu
provides comprehensive system maintenance.
Use this menu to exit (necessary for remote configuration).
Prestige 724 G.SHDSL CSU/DSU
Advanced Management
23. System Password
24. System Maintenance
99. Exit
FUNCTION
2-7