Table of Contents
Advertisement
To upload the configuration file, do the following:
1.
Type atlc after the Enter Debug Mode message.
2.
Wait for the Starting XMODEM upload message before activating XMODEM upload on your
terminal.
3.
After a successful firmware upload, type atgo to restart the Prestige.
The Prestige is now reinitialized with a default configuration file including the default password of 1234.
2.9
General Setup
Menu 1 – General Setup contains administrative and system-related information.
To view menu 1 and fill in the required information, follow these steps:
Step 1.
In the main menu, type 1 to display Menu 1 – General Setup, shown next.
Step 2.
Fill in the required fields and turn on the individual protocols for your applications, as explained
in the following table.
FIELD
System Name Type any descriptive name, (with no spaces), up to 30 alphanumeric
characters long, including dashes "–" and underscores "_". This field is for
identification purposes but because some ISPs check this name you should
enter your computer's "Computer Name".
•
In Windows 95/98 click Start -> Settings -> Control Panel and then
double-click Network. Click the Identification tab, note the entry for the
Computer name field and enter it in the Prestige System Name field.
•
In Windows 2000 click Start->Settings->Control Panel and then double-
click System. Click the Network Identification tab and then the
Properties button. Note the entry for the Computer name field and enter
it in the Prestige System Name field.
Hardware Installation and Initial Setup
Menu 1 - General Setup
System Name= Prestige
Location= MyHouse
Contact Person's Name= Derek
Press ENTER to Confirm or ESC to Cancel:
Figure 2-9 Menu 1 — General Setup
Table 2-4 General Setup Menu Fields
DESCRIPTION
Prestige 724 G.SHDSL CSU/DSU
EXAMPLE
Prestige
2-9
Advertisement
Table of Contents
