Table of Contents
Advertisement
Percent Oxygen Analyzer
Appendix
A.1 Specifications
Ranges : 0-3 % and 0-10 % oxygen (Standard
Signal Output : Voltage: 0–10 VDC, negative ground
Range ID: 0-10 VDC.
Display : Light emitting diode display.
Alarms : Two customer selectable fully adjustable
System Operating Temp : 0-50 °C
Accuracy : ±2% of full scale at constant temperature
Response Time : 90% in less than 4 seconds at 25 °C.
System Power Requirements : 120 VAC, 50/60Hz (optional 220VAC),
System Enclosure : Panel mount. Dimensions (Approx.) 7.0
Sensor Type : Zirconia, solid state
Teledyne Analytical Instruments
Ranges), and 0-25 % (nominal)
Calibration Range. User selectable %
Ranges can be set between 1% and 100 %
oxygen .
Current: 4-20 mA, negative ground
HI and LO alarms.
One sensor failure alarm.
Alarm relays form "C" contacts, dry
contacts rated at 2A for 30VDC, 1A for
115VAC.
±5% of full scale through operating temp.
range once temp. equilibrium is reached.
(At 3 % and higher user defined ranges.)
110W.
W x 6.75 H x 4.26 D.
Appendix
43
Advertisement
Table of Contents
