Introduction; Overview; Main Features Of The Analyzer - Teledyne 9060L Operating Instructions Manual

Percent Oxygen Analyzer

Introduction

1.1 Overview

The Teledyne Instruments/ Analytical Instruments (TI/AI) Model
9060L is a microprocessor-based percent oxygen analyzer for real-time
measurement of the percent of oxygen in inert gases, or in a wide variety
of gas mixtures. It features simple operation, fast response, and a
compact, rugged construction. Typical applications of the Model 9060L
are monitoring kilns, boilers, and flue gas at temperature from ambient
up to 1400°C (2550°F).

1.2 Main Features of the Analyzer

The main features of the analyzer include:
• High resolution, accurate readings of oxygen content from 0-1 %
through 0-100 % O
readout.
• Simple pushbutton controls.
• State of the art zirconia sensor.
• Longer life probes with greater resistance to thermal shock and
mechanical damage during installation and start-up.
• Fast response and recovery time.
• Microprocessor based electronics: 8-bit CMOS microprocessor
with on-board RAM and 16 KB ROM.
• Two user selectable ranges (from 0-1% through 0-100%) allow
best match to user's process and equipment.
• Air-calibration range for convenient spanning at 20.9 %.
• Operator can select autoranging, which allows the analyzer to
automatically select the proper preset range for a given
measurement, or lock the analyzer onto a single range.
Teledyne Analytical Instruments
. Large, bright, light-emitting-diode meter
2
Introduction
11