Master Interface Board (P/N St13042-1); Figure 5-5: Removing The Master Interface Board - Teledyne 6750 Operating Instructions Manual

Total Organic Carbon Analyzer

5.3.3 Master Interface Board (P/N ST13042-1).

The Master Interface Board has no field adjustment. If
malfunctioning, replace the module P/N ST13042-1 using the
instructions below. See Figure 5-5.

Figure 5-5: Removing the Master Interface Board

To Remove the PC Board:
1. Turn off power.
2. Remove plastic cover.
3. Disconnect connectors.
4. Remove panel.
Note: Depending on the configuration, there may be one or two
master interface boards.
Teledyne Analytical Instruments
Maintenance
53