Pump Head Tubing Replacement; Figure 5-14: Removing The Pump - Teledyne 6750 Operating Instructions Manual

Total Organic Carbon Analyzer
Note: Actual mounting panel may appear somewhat different but
mounting hardware is the same.
5.3.12.2 P H T
UMP EAD
Teledyne Analytical Instruments

Figure 5-14: Removing the Pump

R
UBING EPLACEMENT
1. Separate the end bells (the pump head
halves).
2. Hold the end bell containing the rotor as
shown with the tubing retainer grooves
pointing down.
Maintenance
6. Remove 4 pump mounting screws
for pump removal.
7. Replace motor and reassemble in
reverse step sequence.
65